Home > News > Content
Interlining Of The Selection - One Of Technical Guidance
Nov 12, 2016

According to fabric, clothing and the variety and design requirements for different parts of garments, lining of different studies have selected, how reasonable compatibility thing seems to garment factories, but also the interlining fabric products manufacturing plant subject of how to develop appropriate , to select a suitable fusible interlining cloth, fabric and lining not only pay attention to the shrinkage between the close to, but also understand the characteristics of fabrics and clothing appearance and performance needs. 
First, the characteristics of fiber fabric 
We can learn from the three factors to the characteristics of clothing: 
1, 2 fiber content, weave 3, surface finishing 
Let us first fiber cloth Composition: 
Natural fibers: it has a high moisture content, and after being soaked in water can easily lead to changes in size and appearance. Usually, dehydration, natural fibers can be reinstated. 
a, wool: changes in size and moisture content has a significant relationship in water, the wool will increase the size of a lot, it will shrink after drying, leading to deformation of clothes, so in the choice of lining, the fabric must be able to with the size change, and note in the bonding process of the moisture control. 
b, silk: known as the heat-sensitive fabrics, attention to heat and pressure generated by the surface changes (such as glossy), so must try to avoid the use of bonding temperature and pressure and steam, especially satin fabric organization, should use heat very small melt interlining cloth. 
c, Cotton: high heat resistance, and in steam, it is also a relatively good recovery capability, so the cotton in the hot-melt bonding process is relatively stable, but the cotton shrink if not handled, often have higher shrinkage, so in the choice of lining, we must pay attention to both the shrinkage similar. 
d, linen and linen fabrics: hemp fiber clothing is usually more difficult to get a strong adhesion, so pay special attention to bonding methods, access to certain adhesion fastness. 
e, synthetic fibers: from polyester and nylon woven fabrics, it is not the impact of water damage, but when the heat setting is difficult to eliminate folds generated, so must the temperature below the heat setting process is appropriate interlining cloth . 
   Acrylonitrile (artificial wool) fiber cloth, you must select low temperature hot melt fusible interlining cloth, pay attention to when handling hot melt just completed 
Light up light pressure to prevent deformation of bonding sites. 




We, Shanghai Doublegull Textile Co., Ltd. has focused on top quality woven interlining & bedding fabrics products for over 30 years in China. We started as a small operation, but now have become one of the leading suppliers in the interlining industry & home textile industry in China.

Today, DOUBLEGULL has been one of the top producers of quality woven interlining, bedding fabrics and bedding sets products, such as: shirt interlining, outerwear interlining, casual wear interlining, waistband interlining, cap interlining, Arabian thobe interlining, bedding fabrics and bedding sets.

More Interlining  product information:http://www.interlining-fabrics.com/interlining/