Home > News > Content
Cap Interlining Adhesive Conditions
Oct 10, 2017

Cap Interlining Adhesive conditions

Garment lining cloth is a large category of clothing accessories, it plays a role in the clothing from the skeleton. As the construction of housing need to use reinforced concrete skeleton; production clothing need to use lining to do skeleton. Through the lining of the shape, reinforcement, conformal effect, clothing to form a variety of beautiful style. Its classification is:

Clothing lining

Refers to the garment processing, in order to show the characteristics of clothing design, used in all parts of the clothing inside a textile material.

Base cloth

Commonly known as the end of cloth, weaving lining fabric.

Linen lining

Refers to the unprocessed or only sizing straight finishing cotton or linen, is more primitive lining.

Woven resin black carbon lining

Also known as wool lining, is made of cotton, chemical fiber, wool pure cotton or blended as a veil, chemical fiber and yak wool or other animal wool blended as weft, woven into the base fabric, and made by resin finishing lining.

Woven resin interlining

Cotton and chemical fiber pure spinning, blended woven or knitted fabrics, drift or dyeing and other finishing, and made by the resin finishing lining. Referred to as resin lining.

Woven (or knitted) hot melt adhesive lining

Cotton and chemical fiber pure or blended woven or knitted fabric, drift or dyeing and other finishing, and by thermoplastic hot melt adhesive evenly after the lining made of cloth. Referred to as woven adhesive lining.

Non-woven hot melt adhesive lining

Also known as non-woven adhesive lining. Refers to the non-woven fabric by thermoplastic hot melt adhesive coating made after the lining. Stitching non-woven lining also belong to this category. Lining and fabric bonding have certain conditions, specific and lining manufacturers Xiaobian simple understanding.

Bonding machine

Bonding machine generally have two kinds of drum and flat plate.

Adhesive conditions

Adhesive conditions include bonding temperature, pressing time and pressure three aspects. In a certain range of three elements when there is a certain relationship between the interaction. The temperature increases, the pressure increases, the hot pressing time can be relatively shortened, and vice versa. The temperature is too high, hot pressing time is too long, it is easy to damage the performance and color of the fabric, but also easy to produce plastic, pressure is too large, easy to damage the fabric (especially thin fabrics) appearance.

Selection of bonding conditions

Prior to mass production, the bonding conditions must be tested repeatedly to determine the optimum process conditions (the liner supplier should provide the bonding conditions for reference).

Interlining and fabric bonding. Peeled off, if the hot melt in the lining and fabric on the distribution of uniform, then the appropriate bonding conditions, or should be re-tested. Adhesive cloth to smooth, no wrinkles, no foam, no glue. After bonding, to carry out stripping strong, dry cleaning, washing performance test, the test results to achieve the requirements of production. The effect of bonding to achieve the style of clothing, feature requirements.